
to.
Select the
COM tab
on the Configuration dialog.
Set the
Com Port
number that you have connected the GPS to.
Set the
Parity
to None.
Set the
Stop Bits
to 1
Set the
NMEA Baud Rate
to 4800 (almost all Garmins output NMEA data at
4800 Baud, there are a couple of models which allow other Baud rates to be
specified, if you do change from 4800 in the GPS then you must set the same
value in OziExplorer).
Make sure the
Use PVT for Garmin instead of NMEA
Checkbox is
unticked
The
Serial Port Driver
should be set to Driver 2 (this is the default)
Auto Pilot Output settings can be ignored.
2. Garmin GPS Connecting by a USB Port (Garmin USB GPS)
If you are using a USB to Serial Port adapter to connect your GPS you must have a serial port GPS
so refer to the section "Garmin GPS connecting through a S
erial
P
ort".
Settings for the Upload/Download of Waypoints, Routes and Tracks and Moving Map (the
GPS outputs PVT data)
Please note
-
The GPS must be turned on when Moving Map in OziExplorer is started as
OziExplorer needs to send commands to the GPS.
Please double check all settings -
do not assume they are correct.
OziExplorer Configuration (done within the OziExplorer software)
On the File menu choose the Configuration option, this will open the
configuration dialog.
Select the GPS tab.
Select the GPS Make as Garmin
Select the GPS Model to match the model of Garmin GPS you have. If you model
is not listed then select the "Other Garmins" setting. The GPS parameters can be
adjusted to match the specifications for the model of GPS (refer to the GPS
manual for this).
Set the
GPS Upload/Download Datum
to WGS 84, Garmins always do
upload/download of positions in the WGS 84 datum regardless of what datum the
GPS is set to.
on the Configuration dialog.
OziExplorer Help Contents
Comentários a estes Manuais