
Auto Pilot
See the
Auto Pilot Output
help for more details.
Outputs the Standard NMEA sentences which can control an Autopilot. The sentences output are
$GPRMC, $GPRMB, $GPAPB, $GPBWC.
Active
-
Tick the box to enable the Autopilot output. The NMEA sentences are output to the selected
com port whenever you are using moving map mode. The NMEA strings only contain valid
navigational information if you are navigating along a route or to a waypoint. Otherwise the
parameters in the strings are empty.
Com Port
- Select the com port which has the autopilot connected, if the com port is the same
number as the "General Comm Settings" for the GPS then the same Baud Rate and Parity is used.
Baud Rate
- Set the Baud Rate for the port if the port number is different to the "General Comm
Settings".
Parity
- Set the Parity for the port if the port number is different to the "General Comm Settings".
Interval
- The time interval in seconds between the batches of NMEA strings being sent to the
Autopilot. All the supported strings are output in the same batch.
Objects
Route Line Width
- The width of the line (in pixels) used to display the route lines on the screen.
Track
Track 1 Defaults
Line Color
-
Specifies the color used when a track is initially created.
Line Width
- Specifies how wide the track will be drawn on the screen. For speed in drawing it is
better to leave the track width set to one (1), the best visual setting is a width of two (2).
Line Style
- Specifies the line style used when a track is initially created.
Track Control Initial Size
- This determines how the track control dialog is first displayed.
Toolbar Only
- the smallest size.
Toolbar + All Tracks
-
shows the full dialog.
Track Tail Defaults
Line Color
-
Specifies the color used for the track tail.
Line Width
-
Specifies how wide the track will be drawn on the screen. The best visual setting is a
width of two (2). A track width set to one (1) will draw faster.
Line Style
-
Specifies the line style used to draw the track tail.
Specifies the frequency to create a new log file.
OziExplorer Help Contents
Comentários a estes Manuais