
Use Com Port Input
-
If you have a AIS receiver connected to a com (serial) port.
Com Port
- Specify the com port number the receiver is connected to, if the gps and AIS
receiver use the same cable the port number can be the same as the gps NMEA port setting set
in the main OziExplorer configuration.
Baud Rate
-
Set the baud rate the receiver uses, if the same port as the gps NMEA then this
baud rate setting is ignored.
Use TCP/IP Input
-
If you are reading AIS data through the internet.
TCP/IP Host
-
The TCP/IP host address.
TCP/IP Port
- The TCP/IP port number the host is using.
Show Label
-
A label with the ship information is shown on the map next to the ship.
OziExplorer Help Contents
Comentários a estes Manuais